View FAR-M2SC-22M579-D110_252640.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FUJITSU SEMICONDUCTOR DATA SHEET
DS04-21703-3E
ASSP
Piezo Electric VCO
M2 Series (D110)
VOLTAGE CONTROLLED OSCILLATOR (4 to 30 MHz) s DESCRIPTION
The M2 series (D110) Voltage Controlled Oscillators (VCO) directly oscillate in the frequency range of 4 to 30 MHz. The M2 series VCO use a piezoelectric single crystal with high electromechanical coupling coefficient (LiTaO3: lithium tantalate) for stable and wide variable frequency width. Excellent S/N and jitter characteristic due to high Q of lithium tantalate can realize high quality playback sound and picture, especially in PLL circuit of digital audio and video equipments.
s FEATURES
* Wider variable frequency width than quarts crystals: 0.2% or more * High stability (100 times more stable than LC or TTL-IC VCO) * Excellent S/N and jitter characteristic due to high Q of lithium tantalate for high quality playback sound and picture. * Excellent temperature characteristic: -300 ~ 500 ppm (-10 ~ +70C) * 10-pin SIP ready for high-density mounting.
s PACKAGE
1
M2 Series (D110)
s TERMINAL ASSIGNMENT
(Front view) Terminal No. 1 2, 3, 4, 5, 6, 7 8 9 10 Terminal Name VIN A-GND VOUT VCC D-GND Description Control voltage input terminal Analog grounding terminal Output terminal Power supply terminal Digital grounding terminal 10 9 8 7 6 5 4 3 2 1 D-GND VCC VOUT A-GND A-GND A-GND A-GND A-GND A-GND VIN
Note: The GND terminals are not connected inside the module. Be sure to route them on the PC board.
s MAXIMUM RATINGS
Item Power supply voltage Input control voltage Power consumption Operating temperature Storage temperature Oscillation frequency range Symbol VCC VIN PD Ta Tstg -- Rated value -0.5 ~ +7.0 -0.5 ~ +10.0 100 -10 ~ +70 -30 ~ +100 4 ~ 30 Unit V mW C MHz
s RECOMMENDED OPERATING CONDITIONS
Item Power supply voltage Input control voltage Operating temperature Symbol VCC VIN Ta Rated value 4.75 ~ 5.25 0~5 -10 ~ +60 Unit V C
s STANDARD FREQUENCIES
Frequencies 12.288 MHz 13.500 MHz 14.318 MHz 16.934 MHz Uses Audio Video Video Audio Part number FAR-M2SC-12M288-D110 FAR-M2SC-13M500-D110 FAR-M2SC-14M318-D110 FAR-M2SC-16M934-D110 Frequencies 17.734 MHz 22.579 MHz 24.576 MHz 28.636 MHz Uses Video Audio Audio Video Part number FAR-M2SC-17M734-D110 FAR-M2SC-22M579-D110 FAR-M2SC-24M576-D110 FAR-M2SC-28M636-D110
2
M2 Series (D110)
s ELECTRICAL CHARACTERISTICS
(VCC = 5.0 V) Item Power supply current Oscillation frequency Output voltage H level L level Symbol ICC fH f1 VOH VOL f (VCC) f (Ta) Condition Not loaded VIN = 5.0 V VIN = 0 V VIN = 2.5 V VIN = 2.5 V VCC = 4.75 ~ 5.25 V VIN = 2.5 V Rated value minimum -- +2000 -- VCC - 0.5 -- -100 -300 standard 10 -- -- 5.0 0 -- -- maximum 15 -- -2000 -- 0.5 +100 ppm +500 *2 Unit mA ppm V *1
Frequency voltage stability Frequency temperature stability
*1: VCC = 5.0 V standard *2: 25C standard, Ta = -10 ~ +70C
s MEASURING CIRCUIT DIAGRAM
VCC
9
VIN
1
8
Into oscilloscope
Including probe capacity (22 pF)
2
3
4
5
6
7
10
GND
3
M2 Series (D110)
s STANDARD CHARACTERISTICS
Part number : FAR-M2SC-14M318-D110 1. Control voltage and oscillation frequency
5,000 4,000 3,000 2,000
Oscillation frequency change (ppm)
1,000 0 -1,000 -2,000 -3,000 -4,000 -5,000 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
(14.318 MHz)
Control voltage (V) 2. Temperature characteristics
800 700 600 500 400 300 200 100 0 -100 -200 -300 -400 -500 -40
(25C standard)
VIN = 2.5 V
Oscillation frequency change (ppm)
(14.318 MHz)
-30
-20
-10
0
10
20
30
40
50
60
70
80
90
Temperature (C ) 3. Power supply voltage characteristics
2,000 1,500 1,000
(VCC = 5.0 V standard)
VIN = 2.5 V
Oscillation frequency change (ppm)
500 0 -500 -1,000 -1,500 -2,000 4.50 4.75 5.00 5.25 5.50
(14.318 MHz)
Power supply voltage (V) 4
M2 Series (D110)
s PART NUMBER SYSTEM
[Part number example] FAR-M2SC-
1 1
-D
2
Frequency designation
: Nominal frequency in six alphanumeric characters. M indicates the decimal point in MHz. (Example) 14.318 MHz 14M318 : 110 ~ 119 (standard : 110)
2
Serial No.
s MARKING
No.1 pin indication Nominal frequency Lot
F V-12M288 D110
1
10
s DIMENSION
28.0Max (1.102) 7.0Max (0.276)
F V-12M288 D110 20.0Max (0.787)
Sealed side
0.3 (0.012) (0.039) 1 (0.394) 10 0.5 (0.020) 22.86 (0.900) (2.54x9) (0.100x9) 3.40.3 (0.1340.012)
2.54 (0.100)
Unit : mm (inch)
5
FUJITSU LIMITED
For further information please contact:
Japan FUJITSU LIMITED Corporate Global Business Support Division Electronic Devices KAWASAKI PLANT, 4-1-1, Kamikodanaka Nakahara-ku, Kawasaki-shi Kanagawa 211-88, Japan Tel: (044) 754-3763 Fax: (044) 754-3329 North and South America FUJITSU MICROELECTRONICS, INC. Semiconductor Division 3545 North First Street San Jose, CA 95134-1804, U.S.A. Tel: (408) 922-9000 Fax: (408) 432-9044/9045 Europe FUJITSU MIKROELEKTRONIK GmbH Am Siebenstein 6-10 63303 Dreieich-Buchschlag Germany Tel: (06103) 690-0 Fax: (06103) 690-122 Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LIMITED #05-08, 151 Lorong Chuan New Tech Park Singapore 556741 Tel: (65) 281-0770 Fax: (65) 281-0220
All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipment, industrial, communications, and measurement equipment, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan.
F9703 (c) FUJITSU LIMITED Printed in Japan
24

▲Up To Search▲

Price & Availability of FAR-M2SC-22M579-D110

	To Download FAR-M2SC-22M579-D110 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .